Anolis Arcpower 36 Manual. User instructions ArcSource Inground 12 The product generates colored light by means of high power LEDs.The. ANOLIS - Update of user. 7.ArcPower 36-DMX protocol. Manual or any unauthorized modification to the product. Always ground the unit. The electric connection.

• version 1.2. • 8.4 Test sequences...15 8.5 Stand-alone mode...15 8.6 Special functions...

15 9.Control of the ArcPower SmartWhite 72 via RS-232. Barrino Sam Istinu Pdf File. 17 9.1Wiring an RS-232 serial port..17 9.2 Selecting a zone... 17 9.3 Setting a serial port of PC..17 9.4 Zone commands... Unplug mains lead before opening the housing! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOU INITIAL START - UP! Safety instructions Every person involved with installation and maintenance of this product has to: - be qualilfied - follow the instructions of this manual CAUTION! Be careful with your operations.

• 4.Installation 4.1.Connection to the mains The ArcPower SmartWhite 72 is equipped with auto-switching power supply that automatically adjusts to any 50/60Hz AC power source from 100-240 Volts. Carefully prepare the end of the the supply cord and fit a suitable plug.A 3-prong grounding-type plug must be. • 4.2.Mounting the ArcPower SmartWhite 72 The ArcPower SmartWhite 72 should be be placed on a non-f lammable f lat surface in any orientation and fixed by the two screws.There are two mounting holes of diameter 5 mm in housing of the driver. Ensure that instalation place is enough ventilated. Always connect one output with the input of the next ArcPower SmartWhite 72 until all fixtures are connected.In this way,up to 32 fixtures can be chained together.

At the last ArcPower SmartWhite 72 the data link has to be terminated with a terminator. A termination plug is Ω. • Maximum possible number of LED modules connected to the one zone of the ArcPower SmartWhite 72: total Warm Cool Max.number Model LEDs White White of connected LEDs LEDs modules ArcLine SmartWhite Optic 12 ArcLine SmartWhite Optic 24 ArcLine SmartWhite Optic 36. • 5.2.Master-slave operating 1.Unplug from the mains before installation. 2.Connect the LED modules to the fixtures.

3.Connect the DMX output of the master fixture in the data-chain with the DMX input of the first slave. Always connect output with the input of the next slave until all slaves are connected. Blazevideo Dvd Copy Keygen Idm on this page. Up to 32 fixtures can be connected in master/slave chain 4.Insert the termination plug (with 120 Ohm) into DMX input of the master fixture and into the DMX output of the last slave fixture in the link in order to ensure proper transmission on the data link. Operating via DyNet protocol 1.Unplug from the mains before installation.